Skip to main content

Data-based TSD in Merit Palk from 1 October 2026

This guide explains how submitting the TSD in Merit Palk changes from 1 October 2026. It covers sending payments to the Estonian Tax and Customs Board, transaction statuses, correcting errors, refunds, changes to payment types and confirming the TSD.


From 1 October 2026, the way the TSD is submitted changes. Merit Palk sends payout data to the Estonian Tax and Customs Board (ETCB) for each payout and employee, and the ETCB uses this data to compile the TSD report.

The first data-based TSD is due on 10 November 2026. It covers payouts made in October.

Important! Two different rules apply:

  1. Sending the TSD and transactions is based on the payout date. Every payment with a payout date of 1 October 2026 or later goes on the data-based TSD, regardless of the month the pay was calculated for.

  2. Changes to salary types are based on the calculation month. Most users don’t need to change their salary types. Changes are mainly needed if you have employees working abroad. In that case, use the new salary types in calculations where the calculation month is October 2026 or later.
    For details, see the guide Changes to payment types.

For example, September’s salary paid out in October is already declared on the data-based TSD, but the September calculation doesn’t need to be changed.

What changes and who does it affect?

With the data-based TSD, payment data is sent to the ETCB as separate transactions for each employee and each payment. The ETCB reviews the transactions and uses them to compile the TSD.

After sending the transactions, you also need to confirm the TSD in e-MTA(e-Tax Board).

💡  We recommend sending payment data to the ETCB as you go, right after each payment is made. You can confirm the TSD later, but no later than the usual TSD deadline.

From October payments onward, payments that used to go on TSD Annexes 1 and 2 are handled together. Payments and refunds to residents and non-residents now all follow the same logic.

Merit Palk sends salary payment transactions to the ETCB.

If needed, fill in the other TSD Annexes in e-MTA.

Before you start: required permissions

​Sending TSD transactions from Merit Palk

For Merit Palk to submit payment transactions to the Estonian Tax and Customs Board, the company must grant Swedbank AS machine-to-machine (M2M) interface access rights in e-MTA.

Swedbank provides Merit Tarkvara with a secure server service through which the data is transmitted to the Estonian Tax and Customs Board.

You do not need to be a Swedbank customer or sign an agreement with Swedbank for this.

As a rule, access rights in e-MTA can be granted by a member of the company's management board or another person with the necessary right of representation to do so on behalf of the company.

If you also use Merit Aktiva and already submit your VAT return (KMD) via the machine-to-machine interface, Swedbank might already have the required M2M access rights in e-MTA, and you do not need to add new access rights.

Adding authorisation in e-MTA

To add access rights in e-MTA, follow these steps:

  1. Log in to e-MTA and select the company you represent.

  2. In the menu, select Settings → Access permissions → Access permissions of representatives.

  3. Click New access permission.

  4. Enter Swedbank AS's registry code 10060701, click Search and then Next.

  5. Set the start date of the access right. By default, today's date is selected. You can change it if needed.

  6. Select the right Machine-to-machine interface authorisation package (KMD, TÖR, TSD), tick the checkbox and click Add.

In addition, the user who submits the TSD from Merit Palk must have a valid right to submit the TSD in e-MTA, or the Accountant package.

Changes to payment types

Each salary type used in Merit Palk is linked to a TSD payment type code.

From 1 October 2026, several existing payment type codes are merged into one. In some cases, you may also need to change the salary types you use in Merit Palk.

Most Merit Palk users don’t need to change their salary types.

Salary types mainly need reviewing in companies with:

  • employees working abroad (with an Estonian A1/E101 certificate) - add new salary types

  • employees working in several countries - a separate salary type for each country

  • employees with a foreign A1/E101 certificate - no salary type changes needed, but check the certificate details

If an employee works only in Estonia and doesn’t have a foreign A1/E101 certificate, nothing needs to change for normal payroll calculation.

For example, from 01.10.2026, payment types 10, 11 and 12 for a resident employee’s salary income are merged under payment type 10. From now on, they are separated by the country of work and the A1/E101 certificate details.

For this reason, from the October calculation month, the payment type list on salary type cards in Merit Palk shows several options with the same code. For example, code 10 has three payment types:

  • 10 – Employment income

  • 10 – Employment income, work outside Estonia, cert A1/E101 from Estonia

  • 10 – Employment, work in Estonia, cert A1/E101 from foreign country

For details on the changes to payment types, see the guide „Changes to TSD payment types from 1 October 2026 in Merit Palk“.

Making a payout

After calculating salaries, make the payout in Merit Palk as usual.

If you’re paying on payday, open the payout sheet under unpaid salaries and confirm it.

If the date on the unpaid payout sheet is incorrect but the correct payout date is in the same month, you can first confirm the sheet and then change the payout date.

If the payout date is in a different month, go to Payments → Payments and click „New payout“.

When adding a new payout, fill in:

  • Payout date: the date the salary is paid out

  • Calculation date: the date the salary was calculated (by default, the date the payout is added)

  • Payment type:

    • Select All bank accounts if employees’ bank accounts are entered in their personal details

    • Select All employees (cash) if the payout is made in cash

  • Type: select Salary payouts to pay out all calculated salaries not yet paid

  • Employee: to pay all employees whose salaries haven’t been paid yet, leave this field empty

Leave „With net amounts“ ticked and save the payout.

Payout date

The payout date is the day the salary is actually paid out. The same date is used as the payment order date.

You can change the date of a manually added payout sheet. You can change the date on an automatic payout sheet once it has been confirmed.

You can only change the payout date within the month of the sheet’s original payout date. For example, if an automatic sheet was created with the 5th of next month as its date, you can only change the date within next month.

To move the payout date to a different month, delete the payout and add a new one with „New payout“.

Important! If the transactions on a payout sheet have been sent to the ETCB and are waiting to be checked, or are being cancelled, you can’t change that sheet’s payout date. If the ETCB has already checked the transactions, you’ll need to resend them for review after changing the date.

Calculation date

When adding a payout, you also need to enter the calculation date. By default, it’s the date the payout is added.
The calculation date can’t be later than the payout date.

The ETCB uses the calculation date to check non-residents’ residency. When you add a payout sheet, it isn’t yet known whether it will include non-residents, so the calculation date is currently mandatory on all payout sheets.

For example, if payroll is calculated on 05.10.2026 and paid on 06.10.2026, enter:

  • calculation date: 05.10.2026

  • payout date: 06.10.2026

Sending TSD transactions

You’ll find payout transactions under Payments → Tax declaration form TSD (APA).

To send individual transactions to the ETCB, tick the ones you want to send and click „Send transactions“.

To send all rows, you don’t need to tick anything. Just click „Send transactions“, and all rows are sent to the ETCB.

We recommend sending payment transactions to the ETCB as you go, after each payment.

After you send them, the ETCB checks the transactions and sends a response back to the program.

You don’t have to wait on the page for the ETCB’s response. You can carry on working, and Merit Palk will let you know when the response arrives.

Submitting TSD transactions with an XBRL GL file

If you don’t send the transactions with „Send transactions“, select Export XBRL GL file in Merit Palk. The file upload location in e-MTA has changed.

Do the following:

  1. In e-MTA, open TSD and add a new declaration.

  2. Open the new TSD and click Payments.

  3. Click More actions and select Import from XML/ZIP file (XBRL).

  4. Select the file you exported from Merit Palk on your computer.

Refunds (negative amount calculations)

The data-based TSD also changes how refunds are declared.

If an earlier payout needs to be recalculated for an employee, add that amount to the payroll sheet as a negative amount.

When entering a refund:

  1. Go to Payroll → Payroll sheets, enter the person’s name on an empty row, choose the salary type and rate, and enter the rate as a negative number.

  2. In the window that opens, choose the month of the original payout, i.e. the month when the refunded payout was made.

  3. In the Payout date field, choose the earlier payout the refund relates to.

If the refund exceeds a single earlier payout, split it into multiple rows and link each amount to the corresponding earlier payout.

NB! The salary type used for the refund must match the salary type and settings the refunded pay was originally calculated with.
For example, if the original pay was calculated with a salary type whose payment type is 10 – Employment income, work outside Estonia, cert A1/E101 from Estonia and the country of work is Finland, the refund must use a salary type with the same settings.

What do the icons on the TSD mean?

The icons next to TSD rows show each transaction’s current status:

– the transaction hasn’t been sent to the ETCB yet.

– the transaction has been sent, but the ETCB’s response is still pending.

 – the transaction has been checked, and everything is in order.

 – there is a warning for this transaction. You can still confirm the TSD, but we recommend checking the warning by clicking the icon.

– the transaction has an error that must be fixed. Click the icon to see the error.

 – the payout has been deleted. If it was already sent to the ETCB, the cancellation is sent to them too.

 – a payout already sent to the ETCB has been changed in Merit Palk and the transaction must be sent again.

The ETCB may show a yellow warning if, for example, the payout is made to a person who isn’t registered in the employment register, or if there is an issue with the use of the basic exemption.
​Red means an error, yellow a warning and green that the transaction is in order.
A yellow warning doesn’t stop you from confirming the TSD, but always check what it says.

Correcting errors

If the ETCB finds an error in a transaction, a red icon appears next to that row. Click the icon to see the error message.

To correct a payout already sent to the ETCB:

  1. Delete the incorrect payout.
    If the payout has already been sent to the ETCB, the program automatically initiates a cancellation of the transaction. While it’s being cancelled, you’ll see the message „Cancellation of payouts started“. Wait until it finishes. You can’t do anything else in the program in the meantime.

  2. Make the correction in the calculation.

  3. Make the payout again.

  4. Send the corrected transaction to the ETCB again from Payments → Tax declaration form TSD (APA) using „Send transactions“.

Confirming the TSD

You can’t confirm the TSD from Merit Palk yet. The program can only send transactions to the ETCB.

If every row has a green icon, the ETCB has checked the transactions, and they’re all in order.
If a row has a yellow warning, check what it says. A yellow warning doesn’t stop you from confirming the TSD. Errors marked with a red icon must be fixed before you confirm.

Once the transactions have been checked and any errors fixed, confirm the TSD in e-MTA.

To confirm the TSD:

  1. Log in to e-MTA

  2. Open the TSD for the relevant period

  3. Check the other TSD Annexes if needed

  4. Confirm the TSD in e-MTA

💡 Sending transactions from Merit Palk and confirming the TSD are two separate steps. Merit Palk sends payout data to the ETCB, but for now the TSD itself is confirmed in e-MTA.

Data-based TSD workflow in short

1. Calculate salaries.
​2. Make the payouts.
​3. Send the payout transactions to the ETCB from Payments → Tax declaration form TSD (APA) with „Send transactions“.
​4. Wait for the ETCB’s response and review the transaction statuses.
​5. Fix errors marked with a red icon and send the changed transactions again if needed.
​6. Check the yellow warnings.
​7. If needed, fill in the other TSD Annexes in e-MTA.
​8. Once all the required data is in order, confirm the TSD in e-MTA.

Remember: from October payouts onward, salary data goes from Merit Palk to the ETCB per payout and per employee. The ETCB checks the data and uses it to put together the TSD.
If you have employees working abroad, change their salary types in calculations from the October 2026 calculation month onward.

We recommend sending transactions as you go. Confirm the TSD in e-MTA once all of the month’s data has been sent and is in order.


Did this answer your question?